Step by step process
Step one

Step two:
Wash down with scrubbing brush
Step three:
Rinse with high pressure hose (3700psi h20)
Step four:
Crack repairs (dowled)
Step five:
Crack repairs, epoxy
Step six:
Prime surface (driveway)
Step seven:
Spray borders
Step eight:
Set out and lay stencil borders
Step nine:
First coat
Step ten:
Second coat and third coat applied
Step eleven:
Remove stencil
Step twelve:
Broom off excess debris and dust
Step thirteen:
Two coats of seal applied
Step fourteen:
Completed job! Colour disfiguration is patches of wet sealer

 

 

 

 
 
 
Licence# 1970 38c
ABN# 42 780 067 349
Site by FusionStudio